Dune Themed Necromunda Gang WIP (Necromunda):

-
Dune Themed Necromunda Gang WIP (Necromunda):

House Van Saar
I decided to make a custom themed Fremen themed gang for Necromunda. With Maud'dib as the leader, and complete with everyone in the list having a combat knife and respirator to represent crysknives and still suits.



These models were made from a Skitari box and a Wytches box. The Wytches bodies looked a lot

like still suits and I like that there are both male and female bodies in that box. And the capes, hoods, and parts of the guns were taken from the Skitari box as well.

Here is the base of the Fremen. Wytch body with Skitari head:



The cloaks are from the Skitari box, and the body and cloak is all one piece. So the body had to be removed from the cloak.


Three stages for each cloak:
1. Fresh of the sprue
2. Body carved out and removed
3. Removal area smoothed out, and notches carved in where it will attach to the shoulders


Here is a more clear view of the notch in the cloak. I played around a little bit with the angle of the notch, to create some cloaks angled further up to break up each 5 man unit, and to emphasize the dynamic poses of the Wytch models.


My attempt of a gif of the cloaks going onto the bodies.





I really wanted to do a brown desert scheme as that is how I imagined them while reading through the Dune books. I chose green as an accent color to represent House Atreides.


I really like how these guys are coming along, but I still have some more painting work to do on them before they are finished and ready to rule the hive.

Comments

Post a Comment

Popular posts from this blog

Mazdamundi (AoS)

-
Image
Mazdamundi (AoS): Well this was quite a project: I estimate it was a week or two building, two or three weeks painting, and another week for the base. But Its probably the project I'm the most proud of so far. Even though he is dead in the lore of AoS, he lives on in my heart and my lizardmen army as the centerpiece model.  "Mazdamundi, Lord of the Solor-City is the oldest and most powerful of the living Slann Mage-Priests and the current ruler of Hexoatl, the City of the Sun" He has a barrel of grubs ready to be consumed from his throne. "Mazdamundi always carries with him a gourd containing a handful of dried Itxl Grubs. These are very potent magical grubs which absorb raw magical power from the ground. When tha Mage-Lord eats the grubs, he gains the magical energy contained within them. He has to eat the whole gourd-full of grubs to gain a significant effect on his own magical powers" I gave him a Magmadroth instead of a Stegadon, as I t
Read more

Gargantuan Squiggoth WIP(40K)

-
Image
Gargantuan Squiggoth (40k): The Gargantuan Squiggoth is probably one of my favorite Ork models ever designed. The thing is about the size of a cinder block, and weighs about as much as it is solid resin.  Here is the parts for the whole kit all laid out. Test fitting the Howda'... I unfortunately can't find a photo of it.. but the head and tail had to be pinned, and the model is so big that I had to use coat hangers instead of paper clips to pin it! I finally had an excuse to set up and try out airbrushing and it was a lot of fun. Here are the base colors laid out. Side View: Front View: Adding details and rust on the armor, to match the rusty purple paint scheme to match with the rest of my 40k Ork army. I have to go into painting the howda' and hand painting the rest of the Gargantuan Squiggoth next. It is quite difficult to handle and manipulate this model, and I must admit that I get some serious fatigue while trying to
Read more

Dune Themed 40K: Spice Harvester

-
Image
Dune Themed 40K: Spice Harvester A spice harvester is a large, heavy, mobile factory designed to harvest the Spice Melange on the planet Arrakis. This project began life as a Baneblade model, and is what I plan on running it as in games. I used several terrain kits on this project to add components to the Baneblade to build it up, as well as a salvaged Caestus Assault Ram. The terrain kits used were: Sector Mechanicus Galvanic Servohaulers, Thermic Plasma Conduits, and Thermic Plasma Regulator. Using the Leadbelcher rattle can was a lifesaver on this project, and  I used an entire pot of Nulin Oil wash to cover this massive machine. I also free handed a House Atreides symbol of a red hawk that I have been using throughout this army. A close up on the platform of the Spice Harvester. I really liked the idea of being able to put troops on the model itself when in the display case.  The most painstaking part of this project was painting each of the rivets
Read more